Welcome to the MacNN Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

You are here: MacNN Forums > Hardware - Troubleshooting and Discussion > Consumer Hardware & Components > Western Digital Passport 320: How do you Open the Case?

Western Digital Passport 320: How do you Open the Case?
Thread Tools
Forum Regular
Join Date: Jul 2002
Location: Piscataway, NJ
Status: Offline
Reply With Quote
May 18, 2008, 11:22 PM
 
Western Digital recently updated their 320 GIG Passport 2.5" external drive. The old enclosures came in two pieces. These were easily separated so you can remove the high capacity drive and place it you your laptop. The new enclosure is only one piece. DOES ANYONE KNOW HOW TO OPEN THIS DRIVE ENCLOSURE? I am upgrading my drive to 320gig and I want to reuse the enclosure for my old drive.
Timothy Maxwell
Bankers Mortgage Corporation
FHA Direct Lenders • No Down Payment • Bad Credit OK

Visit us on the Web at http://www.Bankersmc.com
     
Posting Junkie
Join Date: Oct 2005
Location: Houston, TX
Status: Offline
Reply With Quote
May 18, 2008, 11:36 PM
 
How much did you pay for the new revision?

I'm surprised they continue to be cheaper than the $140 bare drive; I guess it wasn't just cleaning out inventory of the old enclosure.
     
Junior Member
Join Date: Jan 2006
Location: USA
Status: Offline
Reply With Quote
May 21, 2008, 04:02 AM
 
Does it void the warranty when you open them?
G4 Mini | 1.25mhz | 512mb | 40gb | OS X 10.3.9 | 19in Hanns G LCD
     
Mac Elite
Join Date: Jul 2003
Location: Body in London, mind elsewhere
Status: Offline
Reply With Quote
May 21, 2008, 10:33 AM
 
Originally Posted by ghostdawg View Post
Does it void the warranty when you open them?
I would guess it would.
     
Moderator
Join Date: Apr 2005
Location: Cambridge, UK
Status: Offline
Reply With Quote
May 21, 2008, 02:03 PM
 
They're actually quite easy to open.

You'll break off a few plastic retaining tabs but it just makes it easier to open and re-use in the future, say if you send your laptop off for repair and want to put the original drive back in.

Basically, you need a small screw driver and then just prize the edges apart from the middle matte plastic spine, it comes apart kind of like a book. Once you've separated the sides from the middle, pull the sides out gently and the middle part, including the drive will slide out.

Then fold some of the metal back and with a bit of wiggling, the drive and USB I/O board will come out. Take note of which way up the rubber pads are on. Swap the drive, put the rubber antishock pads back on and off you go.
(Last edited by seanc; May 22, 2008 at 02:46 AM. (Reason:removed extra actually))
     
Forum Regular
Join Date: Jul 2002
Location: Piscataway, NJ
Status: Offline
Reply With Quote
May 21, 2008, 10:32 PM
 
Originally Posted by seanc View Post
They're actually quite easy to open actually.

You'll break off a few plastic retaining tabs but it just makes it easier to open and re-use in the future, say if you send your laptop off for repair and want to put the original drive back in.

Basically, you need a small screw driver and then just prize the edges apart from the middle matte plastic spine, it comes apart kind of like a book. Once you've separated the sides from the middle, pull the sides out gently and the middle part, including the drive will slide out.

Then fold some of the metal back and with a bit of wiggling, the drive and USB I/O board will come out. Take note of which way up the rubber pads are on. Swap the drive, put the rubber antishock pads back on and off you go.
Thanks!
Timothy Maxwell
Bankers Mortgage Corporation
FHA Direct Lenders • No Down Payment • Bad Credit OK

Visit us on the Web at http://www.Bankersmc.com
     
   
Thread Tools
Forum Links
Forum Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Top
Privacy Policy
All times are GMT -5. The time now is 10:26 PM.
All contents of these forums © 1995-2011 MacNN. All rights reserved.
Branding + Design: www.gesamtbild.com
vBulletin v.3.8.7 © 2000-2011, Jelsoft Enterprises Ltd., Content Relevant URLs by vBSEO 3.3.2