[jaisun]

Here's an updated list of the items that have gone unsold...still plenty of goodies left:

Apple 9500 mother board - $30

9500 power supply - $20

604e 233Mhz processor - $20

604 132Mhz processor - $10

G3 266Mhz ZIF - $20

32Mb PC66 SDRAM - $10

3Com 10/100 NIC (not sure if Mac drivers are available) - $10

External SCSI ZIP drive (all cables) - $30

Apple OEM 4x SCSI CD-ROM - $10

Philips 8x SCSI CD-ROM - $10

3x1.44Mb floppy drives (pulled from Beige G3, 9500 and PowerTower) - $2.00 each

DVI to VGA adapter - $7.50

Seagate Hawk 2Gb SCSI Apple OEM HDD (50pin) - $10

Seagate 2Gb UW SCSI 7200RPM HDD - $10

Apple external 4Gb SCSI drive (rare?) - $offer

Apple external 6Gb SCSI drive (also rare?) - $offer

Japanese model Sony 8mm video camera (2x8mm tapes, battery charger/power adapter, add-on Sony 3" LCD monitor with sound and video controls) - $30

If you have any questions or would like the model number for any of these items, please either post a reply or drop me a line at (gripley@thecreek.com).

Also, if you spend $50 or more, I'll ship the item(s) to you for free via UPS ground (I'll split shipping with the buyer on heavier items e.g. multiple HDDs). All prices are negotiable and package deals are certainly possible! Let's work something out

Thanks!

[ 04-17-2002: Message edited by: jaisun ]

[malson]

I might be interested in the FPM RAM and the Diamond Voodoo card. Do you have any more info about the Voodoo card? Links, etc? Thanks...

[malvolio]

Can I put the G3 266 MHz ZIF into a Performa 6300CD?

[jaisun]

Update:

Sold items:
Voodoo 2
ATi XClaim VR

Spoken for (not paid for yet...):
Micropolis 4Gb drive
80Mb FPM RAM
drive sleds

The rest is open game!

[jaisun]

malvolio: I've read that the pin configuration on the ZIFs (Beige G3 or newer) are not compatible with the socket on the 6300 and machines of similar build. However, I don't know that from first hand experience.

Sorry I can't be of any more assitance than that However, you might try xlr8yourmac for the answer...

[malson]

Well, um...hey, thanks for getting back to me...

[mikellanes]

got a model on the 8mm camera? how about a pic?

thanks

mikellanes@mac.com

[Lateralus]

Hmmm... I wonder if any of those processor cards are compatable with a PowerComputing - PowerCurve...?

[jaisun]

Malson: sorry about that...I didn't mean for my general response to be so cold...I apologize. Also, I posted this same list of stuff on macgurus.com...someone from there contacted me about 5 minutes after I posted, asking for the exact same things you did...sorry about that

PowerMacMan: I honestly don't see why you wouldn't be able to use either board in a PowerComputing clone. I know they all have the same pin config/layout and I'm almost positive that only the Mach5 boards had a different voltage and cache speed making them incompatible with anything but 300 and 350Mhz x600 series machines. In fact, I tried the opposite once (PowerComputing 250Mhz board in a 9600) and it worked just fine.

[Lateralus]

So I could use the 604 cards, but not the G3?

[malson]

Originally posted by jaisun:
<STRONG>Malson: sorry about that...I didn't mean for my general response to be so cold...I apologize. Also, I posted this same list of stuff on macgurus.com...someone from there contacted me about 5 minutes after I posted, asking for the exact same things you did...sorry about that
</STRONG>

Hey, that's the way the world works I'm glad that you have been able to sell your stuff here and at other sites. I'll come across another deal one day

[jaisun]

PowerMacMan: Either of the 604 cards would likely work without a hitch in your clone...the G3 ZIF should also work flawlessly, but you'd have to spring for a ZIF carrier card before you could actually use it (xlr8 makes them...check OWC at www.macsales.com). If you have any other questions, please let me know. I'd be more than happy to answer them for you