Welcome to the MacNN Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

You are here: MacNN Forums > Our Archives > General Archives > Digital Video & Audio Archives > Sound card with increased amplification

 
Sound card with increased amplification
Thread Tools
Fresh-Faced Recruit
Join Date: Jan 2002
Location: NYC
Status: Offline
Aug 29, 2003, 05:41 AM
 
I recently purchased a fantastic pair of Grado Labs SR-80 headphones, which I typically plug into the 1/8" minijack on either my iPod or Quicksilver G4. I've read recently that although the headphones sound great, they could sound even better if "driven" by a device with more powerful amplification that what is provided by the iPod or Quicksilver headphone jack. Is there a sound card that I could install on my Quicksilver G4 that would provide increased amplification?
     
Dedicated MacNNer
Join Date: Aug 2003
Location: at work
Status: Offline
Aug 29, 2003, 08:37 PM
 
I think for the most part this is done with outboard gear (a headphone amp) - this is a pretty cheap example of something that should give you enough volume to blow up your nice headphones if you wanted

http://www.musiciansfriend.com/srs7/...base_id/100505

Also, I hear that the sound card being inside the computer is pretty problematic for clear signal. Apparently you get a lot of static and degredation in your mix from the interference caused by your computers guts. A lot of people get either a USB audio interface (like the EMagic 2|6) or an actual recording interface like the firewire based MOTU 828 MkII....

This is probably not too audible to normal peeps, but anyone really paying attention will hear the static and fuzz once you turn it up enough - especially through your new headphone amp....
     
Kikaida  (op)
Fresh-Faced Recruit
Join Date: Jan 2002
Location: NYC
Status: Offline
Aug 30, 2003, 06:45 AM
 
Originally posted by Super Glitcher:
I think for the most part this is done with outboard gear (a headphone amp) - this is a pretty cheap example of something that should give you enough volume to blow up your nice headphones if you wanted

http://www.musiciansfriend.com/srs7/...base_id/100505

Also, I hear that the sound card being inside the computer is pretty problematic for clear signal. Apparently you get a lot of static and degredation in your mix from the interference caused by your computers guts. A lot of people get either a USB audio interface (like the EMagic 2|6) or an actual recording interface like the firewire based MOTU 828 MkII....

This is probably not too audible to normal peeps, but anyone really paying attention will hear the static and fuzz once you turn it up enough - especially through your new headphone amp....
Thanks!
     
Dedicated MacNNer
Join Date: Aug 2003
Location: at work
Status: Offline
Aug 31, 2003, 01:31 PM
 
no problem
"Thank you Mario, but our princess is in another castle."
     
 
   
Thread Tools
Forum Links
Forum Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Top
Privacy Policy
All times are GMT -5. The time now is 06:21 AM.
All contents of these forums © 1995-2011 MacNN. All rights reserved.
Branding + Design: www.gesamtbild.com
vBulletin v.3.8.7 © 2000-2011, Jelsoft Enterprises Ltd., Content Relevant URLs by vBSEO 3.3.2