Welcome to the MacNN Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

You are here: MacNN Forums > Our Archives > General Archives > Digital Video & Audio Archives > XLR inputs on DVCAM...better?

 
XLR inputs on DVCAM...better?
Thread Tools
Forum Regular
Join Date: Jun 2001
Location: Portland, OR
Status: Offline
Mar 11, 2002, 03:13 PM
 
If I want to grow into my DVCAM (prosumer).... should I be looking into one that has XLR inputs for sound? I've heard that it makes it easier to jack into places that might already be mic'd up.

regards...
_ _ _ _ _ _ _ _ _ _ _ _ _
" I have a SunPCI card for my SunBlade, and Virtual PC for OSX; both of which makes windows what it needs to be.... a killable process." - BJF
     
tr
Mac Elite
Join Date: Nov 1999
Location: Columbus, Ohio
Status: Offline
Mar 13, 2002, 01:47 PM
 
i guess it depends what kind of work you're going to be doing. if you are going to be shooting at places where you can plug into the PA system via XLR, then yes. if you are planning to use low impedance mics, or have the need for long mic cable runs, or if you are going to get sound via mixing board with XLR outs, then sure.


tr
     
Fresh-Faced Recruit
Join Date: Dec 2001
Location: Chicago
Status: Offline
Mar 14, 2002, 04:55 PM
 
When you start getting a camcorder with XLR input you not in the prosumer area as much as you start getting into the Pro area, which is far better. DVCAM is Sony based as this a great form of media however more expensive. The JVC and Panasonic give you about the same bang for your buck as these use formats that are cheaper. JVC uses Mini-DV and you can get that anywhere and the Panasonic on the low level Pro lines uses the DV format which does cost more yet there is more time on the tape and better quality than Mini-DV.
XLR is far better in the long run for filming there is no doubt about this in just about any type of film situation that comes up. You bring a feed from most area and then you can sound prior to importing into the camera. The quality is better also as you better control of sound. You get to even start to choose the microphone that you want to us for a film or an event.

Tom
     
Grizzled Veteran
Join Date: Oct 2001
Location: London, UK
Status: Offline
Mar 14, 2002, 06:31 PM
 
Originally posted by XPBlows:
<STRONG>If I want to grow into my DVCAM (prosumer).... should I be looking into one that has XLR inputs for sound? I've heard that it makes it easier to jack into places that might already be mic'd up.

regards...</STRONG>
The Canon XL1s allows you to add an XLR adapter to the existing camera body. You don't just have to get the Canon adapter, Optex and a few others do similar ones too.

<A HREF="http://www.canondv.com/xl1s/a_audio_access.html" TARGET=_blank>Canon Audio Accessories
</A>

[ 03-14-2002: Message edited by: Simon X ]
Sizzling like an isotope.
     
XPBlows  (op)
Forum Regular
Join Date: Jun 2001
Location: Portland, OR
Status: Offline
Mar 14, 2002, 06:43 PM
 
I've seen that.....but it looks like it costs $400 or so most places making the camera even more expensive....makes me wonder about the PD150 from sony.... it already has XLR inputs and also does DVCAM. I've also seen XLR to mini plug adapters..... I'm sure they probably work fine.
_ _ _ _ _ _ _ _ _ _ _ _ _
" I have a SunPCI card for my SunBlade, and Virtual PC for OSX; both of which makes windows what it needs to be.... a killable process." - BJF
     
Forum Regular
Join Date: Apr 2001
Location: Oz
Status: Offline
Mar 18, 2002, 03:28 AM
 
If you don't need to change lenses then the PD150 is definetly the best choice. We've got an XL1 with the Canon XLR adaptor as we shoot a lot of stuff in halls with sound coming straight from the mixing desk. The system works well. The Sony system would do exactly the same thing.
all screens are superwide
     
 
   
Thread Tools
Forum Links
Forum Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Top
Privacy Policy
All times are GMT -5. The time now is 02:02 PM.
All contents of these forums © 1995-2011 MacNN. All rights reserved.
Branding + Design: www.gesamtbild.com
vBulletin v.3.8.7 © 2000-2011, Jelsoft Enterprises Ltd., Content Relevant URLs by vBSEO 3.3.2