Welcome to the MacNN Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

You are here: MacNN Forums > Hardware - Troubleshooting and Discussion > Mac Notebooks > Replace logic board or part out PowerBook G4

Replace logic board or part out PowerBook G4
Thread Tools
Fresh-Faced Recruit
Join Date: Feb 2009
Status: Offline
Reply With Quote
Feb 15, 2009, 10:16 AM
 
I came across a powerbook g4 (dvi, 15 inches, 800mhz, 512mbs, airport card, dvd-rom + cd-rw, after market battery never used and after market ac adapter)) sold "as is" on craig's list. I picked it up for $50. It had everything but the hdd. The first time i plugged it (without hdd) I got the flashing ?. I swapped in another hdd and all I would would get the apple chime followed three soft beeps (nothing on the screen). And then eventually, I would power it on and the only sign of life I would get is the caps lock light on, and the num lock light only if I hit F5 (again nothing on the screen). If i let the powerbook sit without the battery for a while, then I would get the apple chime again but then the power cut out right away. This happens with the adaptor or the battery only which leads me to believe it's not the dc-in board. I have tried different ram, disconnected the airport card, disconnected the cd player. I have tried resetting the PMU and every key combination to reset the PRAM (it never seemed to make a difference).

I am guessing the logic board is defective. (Unless the wizards out there can point out something I missed )

I have priced out a replacement logic board on e-bay for about $100 including shipping.

I dont intend to use this myself, i want to sell it off for the most moolah possible . Knowing that, is it better to replace the logic board or to part it out? The case is pretty beat up, aside from the logic board everything works.

What would you do if you were in my shoes?
     
Moderator
Join Date: Apr 2005
Location: Cambridge, UK
Status: Offline
Reply With Quote
Feb 15, 2009, 11:00 AM
 
Swap the RAM to another slot and see what happens, it could have a defective RAM slot, but this sounds like a titanium that AFAIK wasn't affected by this issue.
     
Fresh-Faced Recruit
Join Date: Feb 2009
Status: Offline
Reply With Quote
Feb 15, 2009, 11:46 AM
 
ya, i tried different ram in both slots. still no dice...
     
Grizzled Veteran
Join Date: Oct 2008
Location: UKland
Status: Offline
Reply With Quote
Feb 16, 2009, 05:38 PM
 
The three beeps normally means bad ram or unrecognised ram. If you have swapped ram out then it's more lilkely that it's the actual slots that are bad so you'll be needing that logic board.

Worth more as parts, especially the screen I'd say
     
   
Thread Tools
Forum Links
Forum Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Top
Privacy Policy
All times are GMT -5. The time now is 12:51 AM.
All contents of these forums © 1995-2011 MacNN. All rights reserved.
Branding + Design: www.gesamtbild.com
vBulletin v.3.8.7 © 2000-2011, Jelsoft Enterprises Ltd., Content Relevant URLs by vBSEO 3.3.2