[mdf-occ1]

I have a rev1 B&W G3/300 mhz. I broke my warranty (was up anyhoo) and tried to overclock it today. I followed instructions from xlr8yourmac.com and well, no results. I tried EVERY single configuration, from 350mhz up to 650mhz and nothing. On 350mhz settings, it did started up once but never got past boot.

I left the 100mhz bus speed alone...

Any suggestions?

- mdf-occ1

[exa]

Is there no setting for anything lower than 350mhz and higher than 300mhz? Try that... As for the processor itself, some processors have good yields while others do not. For example, I have a beige G3 266mhz and I can clock it to the maximum of 315/70mhz, tho not that stable, I am at 300mhz supser stable. My friend, however, with a desktop beige g3 266mhz (mine is a minitower) got his processor to clock up to 366mhz! (running at 333mhz stable) He must have gotten a great yield... so this is one thing to consider.

[mdf-occ1]

I don't think their are any settings for jumps inbetween 300 and 350. That and the increase in speed would be almost unnoticeable.

I was going to try playing with the bus speeds and the clock speeds together, but I've *heard* this was a bad idea.

Has anyone tried this, and had successful results?

- mdf-occ1