[rhogue islander]

Hi,

I have a QS 2002 DP1000 with a 3-port USB card installed.

10.2.4 seems to see the extra ports but does not detect anything attached to them. If I unplug my MS Intellimouse Explorer from the QS's USB port and plug it into a port on the USB card, the led does not light up. Same for my keyspan serial to USB adapter.

I tried moving the USB card to another slot but the problem remains.

I have 10.2.3 on another drive. When I boot that all devices are detected and work fine.

Anyone else have similar problems?

[Moonray]

The USB card in my G3 continues working fine. Is your card still shown in the Apple System Profiler? Maybe that'll give you some hints.

-

[rhogue islander]

All usb items in System Profiler are lumped under 'USB Info'. Although the card itself is not listed, the ports do appear.

Several reboots and a reset of PRAM later and still no go, so I shut down the computer and went out to run a few errands.

Now I start the machine and low and behold all devices connected to the USB card appear and function. I trust all is OK now and that I will not suffer this problem again intermittently.

[rhogue islander]

Well now everything connected to the USB card has disappeared again. I can't seem to get it back. If I boot my 10.2.3 partition (on another drive) everything shows up as it should.

This is getting a little annoying...

[thesearcher]

I saw in another thread that installing the .4 combo update over the .4 regular update solves some problems. It's worth a try, maybe.

[rhogue islander]

Thanks for the reply.

I saw the post you mention and gave it a try. No luck though.