If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Orig Ibook running 10.2.3
Graphite BS V 3.84
New Airport card in Ibook
No connection.
Base station in Bridge mode, Ibook set to static IP.
Ibook sees the BS, gets BS ID # but says "Status unavailable" at the bottom of the Internet Connect Window. Full signal level and correct network name in IC.
Not using WEP or closed network at the moment.
It looks like everything is seeing everything else but I can't surf when using a strictly Airport connection!
Have I missed something here? Is the Airport Card in the Ibook bad???
(Just for your info, it was behaving this way with a Linksys BEFW11S4 also. Never got that to work either.)
HELP!!!!!
After looking at the info in the Network Utility, when the Airport card is active in the Ibook it says the link is inactive and the IP address is 6.3.6.0. However when I turn off the card in the Ibook it says the correct IP address and that the link is active!!!!
I'm confused!!
Help some more!!!!!
Dave
Any day you see the green side
of the grass is Good!
Have you tried resetting the ABS along with using DHCP?
You'll probably need to post more detail about your setup for people to help. Like why are you in bridge mode?
Mac's Rule!
*************************************
13.3" 1.83 MacBook, 2GB, 120GB
13.3" 1.83 MacBook, 2GB, 80GB
Mac Mini PVR, 1.66Ghz w/2GB, eyeTV 2.0, 100GB HD and 50" DLP
Mac Mini, 1.83Ghz (before Apple released one) w/2GB, 80GB HD and 20" LCD
Top
