MacNN Forums (http://forums.macnn.com/)
-   Classic Macs and Mac OS (http://forums.macnn.com/classic-macs-and-mac-os/)
-   -   Connecting Quadra 800 (PowerPC 601Daystar) to G3 Powerbook via Ethernet (http://forums.macnn.com/64/classic-macs-and-mac-os/47031/connecting-quadra-800-powerpc-601daystar-g3/)

 
Gillfoto Mar 3, 1999 02:46 PM
Connecting Quadra 800 (PowerPC 601Daystar) to G3 Powerbook via Ethernet
First where to get Femala type plug/adaptor
for Ethernet, as Quadra 800 has male outlet, and you get from G3 Powerbook cable with two male ends :-(
Also will there be a conflict? The Quadra runs 8.1/non-HFS and the Powerbook runs 8.5.1/ HFS. Any help appreciated :-)

------------------

 
DMSDFW Mar 10, 1999 04:23 PM
I think you talking about Apple's AAUI connector for ethernet on the 800. Your G3 powerbook should have a rj-45 connector for ethernet. You should be able to connect them with a rj-45 cross over cable connected to the AAUI adapter's rj-45 port side and the rj-45 port on the G3 PB. The 800 connects to the AAUI side of the adapter and rj-45 to the cross over cable. I would connect the machine up before starting them and start the G3 PB first before the 800. Then go to the control panels/appletalk and select ethernet or ethertalk (depense on what OS). We call this a pier to pier network, but it much easier to set up on the Macintosh Platform. If you have anymore question email me.
David
dms@fastlane.net
 
All times are GMT -4. The time now is 10:09 PM.

Copyright © 2005-2007 MacNN. All rights reserved.
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.


Content Relevant URLs by vBSEO 3.3.2