|
|
Preforma with OS 7.5.1
|
|
|
|
tbrock2000
|
|
I have a Preforma 6205CD with 32M of RAM and need to update my system to be able to do my taxes this year. So was wondering how far up the line I can go with OS upgrades. Can I use 8.something or have to stick with 7.5.somethings?
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Oct 1999
Location: Austria
Status:
Offline
|
|
I think OS 7.5.5 (available for free with Apple) would be a very good choice for the Performa 6205 (75 MHz, as far as I know).
Alternatively, you can also use OS 7.6.1 (my favourite allround OS for non-G3 systems) and I am pretty sure that 8.1 will also run fine on this processor (but note that 8.0 is not recommendable and all 8.x versions take up more RAM than 7.x versions).
However, Apples says in their specs regarding the 6200:
>Mac OS Supported:
>7.5.1, 7.5.3, 7.5.5, 7.6, 7.6.1, 8.0
Best regards,
Walter.
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Mar 1999
Status:
Offline
|
|
THESE ARE REPOSTS due to a DUPLICATE POSTIING that has been DELETED
stangold
Junior Member posted 01-23-2000 10:53 AM ��� ���� ��
------------------------------------------------------------------------
I have installed at least 8.1 on this machine and it seems to work fine if you have enough memory installed in the machine. I maxed the memory out on this machine and eventhough it's a slow Mac it works fine.
Gregory
Member posted 01-23-2000 12:24 PM ��� ���� ��
------------------------------------------------------------------------
I upgraded someone's 6200 to 8.6 and RAM to 64MB. Runs fine. Otherwise, 7.5.5 is a free update. you can buy older software from Sun or Shreve on CD or just download updaters off Apple. There are also updaters for Mac OS on any Office or Word 98 CD if you have that.
Greg
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Apr 1999
Location: Spanish Fork, UT, USA
Status:
Offline
|
|
You can go up to 9 if you want. 9 should work on any PPC computer, however the closer your computer is to PowerMac 6100/60 the slowe 9 is...
|
|
|
|
|
|
|
|
|
Seagull
|
|
This Mac has a PowerPC 603 processor at 75MHz. Because it has a PowerPC processor, you can run Mac OS 9 on this computer but since the 603 is the slowest of PowerPC processors and because the processor is only at 75MHz, it will be very slow running Mac OS 9, so earlier versions would be recommend. If you decide to run Mac OS 9, you should upgrade to at least 48MB of memory and buy RAM Doubler to triple that memory. For information on this Mac model, go to http://www.everymac.com/systems/appl...ma_6205cd.html
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Oct 1999
Location: Meredith, NH, USA
Status:
Offline
|
|
This is just speculation and not experience, but as long as you have enough RAM, I think that 8.6 or 9.0 might be the way to go. My understanding is that by 8.5 or so, Apple finally "got rid of" legacy 68K code in the I/O sections of the OS. Therefore, with less emulation to perform via a "slow" CPU and LOTS of RAM, you might actually be pleased with the performance of 8.6 or OS 9. However, with a 250Mhz G3 card in a 9600 (clone) I find the Multiuser function in OS9 to be VERY SLOW loggin on and off. Once logged in, it's brisk.
Just a thought. Good luck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|