|
|
CD-ROM player for P'Bk 5300cs
|
|
|
|
Fresh-Faced Recruit
Join Date: Jul 2001
Status:
Offline
|
|
Does anyone know of a CD-ROM player to attaach to my 5300 powerbook? Or where to download the Canon PoserShot Browser? I'm going nutz trying to load pix from my digital camera! I have Graphic Converter, (but no instructions for using it) but it won't open the pix from my PowerShot S10!!!!!! Anyone knowledgeable about this kind of situation? My local MUG hasn't been able to help, despite many suggestions . . . thanks!
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Jan 2001
Location: Rolling Hills of Wheat
Status:
Offline
|
|
It would be helpful to know what kind of CD drive you want. I can only assume that you want a straight up CD rom drive. Assuming that you will have to purchase an external SCSI drive with a PowerBook scsi cable. Yes, you can get an adapter for a normal scsi cable, but I don't recommend that because a dedicated cable with the PowerBook scsi end on it is your best choice.
I would check with these vendors: ClubMac, APS Technologies. They both sell drives in external enclosures that should work well with your system.
Theoreteically you should be able to download the software you want from the Cannon web site. Japaneese companies that make many different products often suffer from having large web sites that are hard to navigate. Just search on their core site and follow links that seem logical. That is the best advice I have for finding your sofware.
My guess is that Graphic converter isn't going to interface with your camera, which is what you need to do to get the photos off from it.
For people with older Mac hardware that want to participate in digital photography, I always recommend the Sony mavica because it works well with all computer that have floppy drives and the image quality is about as good or better than many low end digital cameras.
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Feb 2000
Location: San Francisco, CA
Status:
Offline
|
|
As far as I know, the powershot utilities are available only on the CD-ROM which comes with the camera. Canon's web site only has newer drivers and firmware updates. What you could do is to copy the CD to another computer, and boot the powerbook in SCSI disk mode. Then you can copy over the installer, and run it from there. Another option would be to copy the files onto an external ZIP drive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|