|
|
Swapping Drives from PB to PB
|
|
|
|
Junior Member
Join Date: Nov 2004
Status:
Offline
|
|
I have a 15" 500mhz TiBook and just purchased a 12" Aluminum PB. I would like to swap the HD from the 15" to the 12" (and vice versa). The 15" has a speed of 7200 and is all set up for my use. My question is this, can I simply swap drives and assume the machines will both boot up and run normally or will this create a problem?
Thanks in advance.
P
|
|
|
|
|
|
|
|
|
Moderator
Join Date: Oct 2001
Location: San Jose, CA
Status:
Offline
|
|
Besides the difficulty of removing the drive in the 12", you have to make sure it is a 9.5 mm drive. Anything taller won't fit. Other than that caveat, you should have no problems.
Steve
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2003
Location: Salt Lake City, UT USA
Status:
Offline
|
|
I had my local Apple service center do the swap for me. I think they charged me $59. I had OSX 10.3 Panther installed on both drives, so it worked flawlessly. Working on the 12" AlBook yourself is supposed to be tricky, and voids the warranty.
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Nov 2004
Status:
Offline
|
|
Is the drive in my PB (15") the right size (9.5)?
|
|
|
|
|
|
|
|
|
Admin Emeritus
Join Date: Oct 1999
Location: Zurich, Switzerland
Status:
Offline
|
|
It's exceedingly unlikely that the TiBook has a drive taller than 9.5mm -- even my old PowerBook G3 came with a 9.5mm drive.
Assuming you're running Mac OS X on the TiBook, and it's current, you should have no trouble. Just make sure that the version of Mac OS X installed on the TiBook's drive (before the swap) is at least as recent as the version the AlBook shipped with.
tooki
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|