|
|
Powerbook G4 Titanium 667 MHz DVI - which kind of DVI out port has this machine?
|
|
|
|
Mac Elite
Join Date: May 2002
Location: Germany, 51°51´51" N, 9°05´41" E
Status:
Offline
|
|
My beloved Powerbook´s display is dead, the cold cathode lamp refuses to ignite even after forced "sleep - awake" cycles. I dont´t want to spend additional money in buying a "new" display for it because the machine has left its best days behind and since several months is showing other signs of hardware decay (worn casing, signs of damaged ATI graphics chip).
I am in the process of searching a cheap external display and my initial observation is, that modern displays only offer DVI-D (digital) ports. Apple technical documentation only states "DVI port", it does not specify, if it´s an DVI-D (digital), DVI-I (integrated, both analog and digital signal) or DVI-A (analog) port. Does anybody know, which kind of port is provided with the 667 MHz DVI Tibook?
|
Macintosh Quadra 950, Centris 610, Powermac 6100, iBook dual USB, Powerbook 667 DVI, Powerbook 867 DVI, MacBook Pro early 2011
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Mar 2004
Location: UK
Status:
Offline
|
|
Its DVI-I so it will do DVI-D just fine. Or VGA via an adaptor.
Is there such a thing as DVI-A? I can't see the point.
|
I have plenty of more important things to do, if only I could bring myself to do them....
|
|
|
|
|
|
|
|
Moderator
Join Date: Oct 2001
Location: San Jose, CA
Status:
Offline
|
|
There's no such thing as DVI-A.
The port is DVI-I. You can tell because of the blades on one side of the connector shaped like a +. These are the analog pins (RGB) for a VGA connection.
All monitors with DVI will have DVI-I.
Steve
|
Celebrating 10 years and 4000 posts on MacNN!
|
|
|
|
|
|
|
|
Mac Elite
Join Date: May 2002
Location: Germany, 51°51´51" N, 9°05´41" E
Status:
Offline
|
|
Thanks for your answers so far.
There also seems to be an analogue flavour of DVI out in the tech jungle:
How to Recognize a DVI Cable
There are two variables in every DVI connector cable, and each represents one characteristic.
The flat pin on one side denotes whether the cable is digital or analog:
A flat pin with four surrounding pins is either DVI-I or DVI-A
A flat pin alone denotes DVI-D
The pinsets vary depending on whether or not the cable is single- or dual-link:
A solid 27-pin set (rows of 8) for a dual- link cable
Two separated 9-pin sets (rows of 6) for a single-link cable
NOTE: To distinguish from DVI-I and DVI-A, check the pinset. A solid 27-pin set is for a DVI-l; a separated 8-pin and 4-pin
set is for DVI-A.
Link: What is a DVI Port and what can I do with it?
According to this data given there the Powerbook´s DVI port is DVI-I
|
Macintosh Quadra 950, Centris 610, Powermac 6100, iBook dual USB, Powerbook 667 DVI, Powerbook 867 DVI, MacBook Pro early 2011
|
|
|
|
|
|
|
|
Clinically Insane
Join Date: Nov 1999
Location: 888500128, C3, 2nd soft.
Status:
Offline
|
|
Originally Posted by ibook_steve
All monitors with DVI will have DVI-I.
DVI-D, you mean.
|
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Oct 2005
Location: Houston, TX
Status:
Offline
|
|
Originally Posted by ibook_steve
There's no such thing as DVI-A.
There absolutely is. I think it was intended so DVI could be the one connector to rule them all but it was never widely implemented.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|