|
|
Is it possible to swap hard drives between Macbook & Macbook Pro?
|
|
|
|
Grizzled Veteran
Join Date: Jan 2000
Location: South Dakota, USA
Status:
Offline
|
|
I just purchased a nice used Macbook Pro and would like to use it to replace my work Macbook. Both are 2006-2007 models. My work macbook has a 250GB hard drive and has all my work apps & data. Can I simply swap the drives between these 2 macs?
|
|
|
|
|
|
|
|
|
Moderator Emeritus
Join Date: Apr 2005
Location: Cambridge, UK
Status:
Offline
|
|
You could A) swap them over, B) clone the MacBook to the MacBook Pro, C) use migration assistant to migrate your data and apps over.
Not a direct answer to your question, but some extra options in case you hadn't considered them.
|
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Dec 2000
Status:
Offline
|
|
Yes, they’re just 2.5” SATA drives. There is no reason why you can’t swap the drive from one into another. Make sure you have a TORX T6 screwdriver.
|
|
|
|
|
|
|
|
|
Grizzled Veteran
Join Date: Jan 2000
Location: South Dakota, USA
Status:
Offline
|
|
So just so I'm clear, you both are saying that I can swap the drives and use the Macbook Pro just like I used the Macbook. All my work apps and documents will function just fine. Additionally all the drivers from Macbook's Hard drive will work just fine with the Macbook Pro's hardware.
Thanks for the help!
|
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Dec 2000
Status:
Offline
|
|
Your apps and documents will be fine. Your drivers should be okay, but if you really want to be sure about that, you might want to get a FireWire cable and use Migration Assistant to transfer the data. That way, you’ll have all your apps and data from the old machine, but a brand new OS installation that’s sure to be appropriate to the new machine.
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Jun 1999
Location: Las Vegas, NV, USA
Status:
Offline
|
|
It'll work. I put a MBP hard drive into a MacBook and it worked flawlessly.
|
|
|
|
|
|
|
|
|
Clinically Insane
Join Date: Nov 1999
Location: 888500128, C3, 2nd soft.
Status:
Offline
|
|
A friend did the opposite - white MacBook to unibody MBP - and the new machine refused to boot.
|
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Dec 2000
Status:
Offline
|
|
What OS was the white MacBook running? Was it Tiger? If the MacBook was running Leopard (if the MBP is the original unibody — Snow Leopard if it’s the latest model), then I’d expect it to work if it has the latest software updates. Migration Assistant *is* probably the safest way to go, though.
(
Last edited by CharlesS; Nov 14, 2009 at 07:51 PM.
)
|
|
|
|
|
|
|
|
|
Moderator Emeritus
Join Date: Apr 2005
Location: Cambridge, UK
Status:
Offline
|
|
I think the Unibody MBPs were quite a significant hardware change compared to the previous gen MBPs and plastic MacBooks; DDR3, different SATA controllers or settings which wreaked havoc with SATA drives are the ones I can recall at the moment.
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Jan 2003
Status:
Offline
|
|
Even if it doesn't boot up right away, you could do an archive and install or even just an upgrade with the OS disks from the new laptop.
|
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Nov 2000
Location: in front of my Mac
Status:
Offline
|
|
Originally Posted by amazing
Even if it doesn't boot up right away, you could do an archive and install or even just an upgrade with the OS disks from the new laptop.
This is good advice. Go ahead and swap the disks. If it doesn't work, you can upgrade install by booting from the OS X DVD. At this point, if you don't feel comfortable with this you can still go CharlesS' route: install a vanilla OS from the DVD and use MA to restore from your old disk. Either from a TM backup or a clone of the old disk or directly with TDM to the Mac containing your old disk.
|
•
|
|
|
|
|
|
|
|
Clinically Insane
Join Date: Nov 1999
Location: 888500128, C3, 2nd soft.
Status:
Offline
|
|
Originally Posted by seanc
I think the Unibody MBPs were quite a significant hardware change compared to the previous gen MBPs and plastic MacBooks; DDR3, different SATA controllers or settings which wreaked havoc with SATA drives are the ones I can recall at the moment.
yep. Changes in the controller are my guess, as well. I wasn't there, but I do know that the os versions were the same.
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Oct 2008
Location: UKland
Status:
Offline
|
|
It does make a big difference which machine is older than which (but only if your drive has an older version of OS X than was available on the new Mac.
For example, if the MacBook Pro is newer than the MacBook and the MacBook is running an older version of OS X than the MacBook Pro shipped with then you could have issues. The key issue is does your version of OS X understand all about the Mac that is it's new home.
When I switched from my old MBP 15in to my new MBP 17 unibody, my old Mac was already running 10.6.2 so the drive has been perfectly happy in its new home. If my old MBP had still been on 10.5 then it probably would not have booted.
|
This space for Hire! Reasonable rates. Reach an audience of literally dozens!
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Nov 2000
Location: in front of my Mac
Status:
Offline
|
|
It really doesn't matter if it doesn't boot. In such a case you just boot from the OS X DVD and update install. Done. You'll still end up with all your stuff (apps, documents, settings) the way it was before the disk swap.
|
•
|
|
|
|
|
|
|
|
Clinically Insane
Join Date: Nov 1999
Location: 888500128, C3, 2nd soft.
Status:
Offline
|
|
Originally Posted by Doc HM
It does make a big difference which machine is older than which (but only if your drive has an older version of OS X than was available on the new Mac.
For example, if the MacBook Pro is newer than the MacBook and the MacBook is running an older version of OS X than the MacBook Pro shipped with then you could have issues. The key issue is does your version of OS X understand all about the Mac that is it's new home.
When I switched from my old MBP 15in to my new MBP 17 unibody, my old Mac was already running 10.6.2 so the drive has been perfectly happy in its new home. If my old MBP had still been on 10.5 then it probably would not have booted.
As I said, I am well aware of all that, but it appears that this wasn't the issue.
However, I wasn't there, so I have no further diagnostic info.
|
|
|
|
|
|
|
|
|
Grizzled Veteran
Join Date: Jan 2001
Location: Chicago, IL
Status:
Offline
|
|
As I'm sure most of you know, the Migration Assistant works very well. I just migrated a user from a Black Macbook to a MBP and it was shockingly easy. I was very surprised as this sort of stuff never seems to work well...!
|
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Nov 2000
Location: in front of my Mac
Status:
Offline
|
|
Originally Posted by danbrew
As I'm sure most of you know, the Migration Assistant works very well.
Umm, MA was already suggested above.
|
•
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|