Welcome to the MacNN Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

You are here: MacNN Forums > Software - Troubleshooting and Discussion > Applications > Disk Utility ISO Burning Option

Disk Utility ISO Burning Option
Thread Tools
radaspoil
Fresh-Faced Recruit
Join Date: Mar 2019
Status: Offline
Reply With Quote
Mar 17, 2019, 09:43 PM
 
The ISO burning option was removed from Disk Utility? Can't see the option. in MojaveI need to create a bootable Windows 7 USB.
     
reader50
Administrator
Join Date: Jun 2000
Location: California
Status: Offline
Reply With Quote
Mar 17, 2019, 10:25 PM
 
You can do it from the Finder. Right-click on the ISO image, select (Burn "win7.iso" to Disc...) and you'll get a burn controls window.
     
radaspoil  (op)
Fresh-Faced Recruit
Join Date: Mar 2019
Status: Offline
Reply With Quote
Mar 19, 2019, 10:28 PM
 
Originally Posted by reader50 View Post
You can do it from the Finder. Right-click on the ISO image, select (Burn "win7.iso" to Disc...) and you'll get a burn controls window.
it worked but the disk is not recognized as a boot device.
     
reader50
Administrator
Join Date: Jun 2000
Location: California
Status: Offline
Reply With Quote
Mar 20, 2019, 12:08 AM
 
Perhaps a year ago, I burned a Win10 ISO image to DVD using the Finder. Booted from it (using an internal optical drive), and installed Win10 to a spare HD. It was done under High Sierra at the time. Everything worked fine.

My Startup Disk does recognize the DVD as a boot option. But if that doesn't work for you, try booting while holding the "c" key. This will send your Mac to the optical drive.

btw - what Mac model (and year) do you have? Are you using a built-in optical drive, or an external over USB?
     
Ucaomer
Fresh-Faced Recruit
Join Date: Mar 2019
Status: Offline
Reply With Quote
Mar 25, 2019, 04:29 AM
 
Originally Posted by radaspoil View Post
it worked but the disk is not recognized as a boot device.
https://www.uubyte.com/create-bootab...ndows-iso.html
It should not happen once you have finished burning iso file,i used to burned iso to an USB,and it worked on my Mac.
If you want to do it again (Burn iso to an USB),remember to set the bootable USB as the first boot device.
( Last edited by Ucaomer; Mar 28, 2019 at 10:09 PM. )
     
reader50
Administrator
Join Date: Jun 2000
Location: California
Status: Offline
Reply With Quote
Mar 25, 2019, 12:44 PM
 
Windows install media can refuse to work over USB. Apple has solved the problem in recent Macs. But if you have an older Mac, an install disc will only boot in an internal optical drive. If you use an external connected over USB, it still counts as booting from a USB device.
     
   
Thread Tools
 
Forum Links
Forum Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Top
Privacy Policy
All times are GMT -4. The time now is 04:39 PM.
All contents of these forums © 1995-2017 MacNN. All rights reserved.
Branding + Design: www.gesamtbild.com
vBulletin v.3.8.8 © 2000-2017, Jelsoft Enterprises Ltd.,