|
|
Would I be risking too much to...
|
|
|
|
Professional Poster
Join Date: Jul 2003
Location: Canada
Status:
Offline
|
|
Put this 20inch TV:
Which weighs about 25Kgs
On the top shelf of this:
Ikea's website says that the desk's max load is 75Kg.
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Jan 2005
Location: RD Land
Status:
Offline
|
|
I don't see why not. Will it fit underneath that top bar??
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Jan 2001
Status:
Offline
|
|
Originally posted by Rampant Desire:
I don't see why not. Will it fit underneath that top bar??
He wants to put it on the top shelf. I would say go for it, provided the top shelf is wide enough to fit 90% of the base of the TV.
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Jul 2003
Location: Canada
Status:
Offline
|
|
Originally posted by Rampant Desire:
I don't see why not. Will it fit underneath that top bar??
I want to put it on the top shelf.
|
|
|
|
|
|
|
|
|
Senior User
Join Date: Jun 2004
Status:
Offline
|
|
Be very careful - TVs are extremely front-heavy. The uneven distribution of the load is going to make it hard to balance on that top shelf, depending on how wide the shelf is. On top of that, you might tip the desk itself over because TVs are so tipsy.
I'd measure the base of the TV and the size of the shelf, and unless they're at least equal -- don't do it. It's not worth cleaning up the fragments of a TV tube over if someone bumps it, etc.
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Sep 2001
Location: NYC*Crooklyn
Status:
Offline
|
|
you're asking for trouble
you have pets? you may nudge the thing by accident and Boom!
or risk it and learn a valuable lesson
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Jul 2003
Status:
Offline
|
|
Do you live where there are earthquakes? Then definitely don't do it.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Jul 2002
Location: My Powerbook, in Japan!
Status:
Offline
|
|
Do you have children in the house?
|
|
|
|
|
|
|
|
|
Baninated
Join Date: Oct 1999
Location: Michigan, USA
Status:
Offline
|
|
From the pictures given, I'd say no. But if you went to a steel supply yard and drilled and bolted a structural L channel to the bottom of the shelf it could be possible. It'd really only cost you a couple bucks if you had the tools.
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Jul 2003
Location: Canada
Status:
Offline
|
|
Originally posted by Kilbey:
From the pictures given, I'd say no. But if you went to a steel supply yard and drilled and bolted a structural L channel to the bottom of the shelf it could be possible. It'd really only cost you a couple bucks if you had the tools.
Not sure what an L channel is, but the wood shelf is supported by a steel shaft that runs along its bottom and is bolted to the frame.
As for the other questions, no children, no earthquakes, no pets. Ideally, I'd have the face of the TV flush (or slightly set back) with the front of the shelf, and the back of the tv up against the wall behind my desk. It'd overhang the end of the shelf, but not too much of the base, just the tube.
here's a pic with the tv that I'm replacing:
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Mar 2002
Location: Winnipeg
Status:
Offline
|
|
I'm gona say you shouldn't do it... then again I'm a hypocrite since I have my iMac sitting on top of a kinda tilty hutch thing in a dorm room...
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Nov 2004
Location: Belgium
Status:
Offline
|
|
Originally posted by strictlyplaid:
Be very careful - TVs are extremely front-heavy. The uneven distribution of the load is going to make it hard to balance on that top shelf, depending on how wide the shelf is. On top of that, you might tip the desk itself over because TVs are so tipsy.
^^^For this reason: don't do it.
|
iMac 20" C2D 2.16 | Acer Aspire One | Flickr
|
|
|
|
|
|
|
|
Baninated
Join Date: Oct 1999
Location: Michigan, USA
Status:
Offline
|
|
Originally posted by brapper:
Not sure what an L channel is, but the wood shelf is supported by a steel shaft that runs along its bottom and is bolted to the frame.
As for the other questions, no children, no earthquakes, no pets. Ideally, I'd have the face of the TV flush (or slightly set back) with the front of the shelf, and the back of the tv up against the wall behind my desk. It'd overhang the end of the shelf, but not too much of the base, just the tube.
here's a pic with the tv that I'm replacing:
[IMG]http://img.photobucket.com/albums/v142/brapper/desk.jpg[/MG]
I'd say you shouldn't have a problem. But I would put the front of the TV back and inch from the front of the shelf. TVs are very front heavy.
|
|
|
|
|
|
|
|
|
hayesk
|
|
Originally posted by Kilbey:
I'd say you shouldn't have a problem. But I would put the front of the TV back and inch from the front of the shelf. TVs are very front heavy.
I would clamp it down in some way.
|
|
|
|
|
|
|
|
|
Baninated
Join Date: Oct 1999
Location: Michigan, USA
Status:
Offline
|
|
Originally posted by hayesk:
I would clamp it down in some way.
Should work great in my opinion.
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Oct 2002
Location: England | San Francisco
Status:
Offline
|
|
Originally posted by brapper:
http://www.ikea.com/PIAimages/31691_PE121153_S3.jpg
THATS MY DESK!
|
|
|
|
|
|
|
|
|
Professional Poster
Join Date: Jul 2003
Location: Canada
Status:
Offline
|
|
Originally posted by Peter:
THATS MY DESK!
...would you put a 60 pound weight on its top shelf?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|