|
|
Paint chipping? Why not strip it? But how?
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: KrustyVille
Status:
Offline
|
|
WEll yes Dudes, my Ti 550 is gradually chipping out on the paler contour parts... Well instead of botching it up with TiPaint (which I heard ain't worth cr@p) how about stripping it? The gray Titanium part is intact so I won't be stripping that, but seems that the plastic part is black underneath its cheap paint, so, wouldn't it look cool?
What would be the best way of doing a nice job?
Thx yall!
|
this lounge is a poor substitute to the bbq.
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Dec 2000
Location: Chicago, IL
Status:
Offline
|
|
i would like to know that too. which paint thinner would be best for this job? or acetone? i just wanna strip the white part on the edge of my TiBook off. anyone know?
|
|
|
|
|
|
|
|
|
Senior User
Join Date: May 2002
Status:
Offline
|
|
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: May 2000
Location: Santa Rosa, CA
Status:
Offline
|
|
SOLIDAge had the paint on his PowerBook stripped. I believe vmarks did it for him. Here's a link to the thread. It's a shame the picture is no longer up. The stripped PowerBook looked pretty cool.
TiCE PowerBook G4
|
Slick shoes?! Are you crazy?!
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Dec 2000
Location: Chicago, IL
Status:
Offline
|
|
Originally posted by dialo:
do a search.
i tried searching and i couldn't find anything. that's why i asked. so don't try to get smart
Stogieman, thanx. i was looking at that thread earlier. he didn't say what he used. so i guess i'll try emailing him and ask.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: KrustyVille
Status:
Offline
|
|
Originally posted by iRebound:
i would like to know that too. which paint thinner would be best for this job? or acetone? i just wanna strip the white part on the edge of my TiBook off. anyone know?
I've tried a bit of kerosene followed by a lot of rubbing... Not ideal. Kinda sucks actually!
|
this lounge is a poor substitute to the bbq.
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: May 2000
Location: Santa Rosa, CA
Status:
Offline
|
|
I just finished stripping the paint off of my PowerBook's hinges. I used plain old Jasco Brush Cleaner and it worked like a charm. After all of the paint was completely stripped off, I applied Brasso to polish off the titanium and then followed it up with a couple of coats of Liquid Glass. The clear coating should help keep the hinges from oxidizing.
My PowerBook now has the most Bling'in hinges on MacNN.
http://homepage.mac.com/kcrosbie/macnn/hinge1.jpeg
Edit: NO BIG INLINE IMAGES!!!!!!! --tooki
(
Last edited by tooki; Nov 18, 2003 at 09:52 AM.
)
|
Slick shoes?! Are you crazy?!
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: KrustyVille
Status:
Offline
|
|
Nice hinges... like.... shiny... hubcaps...
very kewl! Thanks for the tip.
(
Last edited by tooki; Nov 18, 2003 at 09:51 AM.
)
|
this lounge is a poor substitute to the bbq.
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Jan 2002
Location: Live at the BBQ
Status:
Offline
|
|
One thing to note... the paint on the carbon-fiber frame also serves to provide some level of shielding, underneath the top layer of paint is a layer of paint with copper powder embedded. I honestly have no idea whether removing that paint completely will have any real affect on a TiBooks perfomance or behavior, however...
|
"Bill Gates can't guarantee Windows... how can you guarantee my safety?"
-John Crichton
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: KrustyVille
Status:
Offline
|
|
Originally posted by himself:
One thing to note... the paint on the carbon-fiber frame also serves to provide some level of shielding, underneath the top layer of paint is a layer of paint with copper powder embedded. I honestly have no idea whether removing that paint completely will have any real affect on a TiBooks perfomance or behavior, however...
Well, I've been scraping mine off and it's about 70% gone with no influence on performance or behavior. I'd like to scrape it off completely and recoat with.... whatever!
I have no idea, but for now it sure looks like sh!t...
|
this lounge is a poor substitute to the bbq.
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Oct 2003
Status:
Offline
|
|
Long ago I did some work on my old 667 DVI.
http://homepage.mac.com/bhardy3/PhotoAlbum34.html
The tube of MAAS polishing compound was found at a Wallgreen's drug store. The hinge covers were removed first and stripper was applied and then the polish. I did use the Aircraft Klean-Strip remover on the hinge end tips but realized quickly that the stuff has a tendency to bleed onto other surfaces of the Powerbook. In the end I sent it in to Apple for paint replacement. It came back with misaligned hinges twice. The third time it came back with a broken USB port. The fourth time it came back with a scarred lid and it looked like the guy who worked on it was eating chocolate, which made brown smears on the Ti. After much polite and persistant complaining it came back looking brand new. I sold it for a 17", not wanting to go thru looney tunes paint repair idiocy again with Apple. As far as I am concerned they have never heard of quality control, or simply do not care.
(
Last edited by urrl78; Nov 16, 2003 at 08:34 PM.
)
|
|
|
|
|
|
|
|
|
Moderator Emeritus
Join Date: Apr 2001
Location: Up In The Air
Status:
Offline
|
|
I did do the paint removal on Solidage's tiBook. I used a product meant to strip the paint from an aircraft. The active chemical was toluene and methylene chloride.
Savogran SuperStrip was the product. Nasty stuff.
I have pictures, but they aren't online, since solidage's were. My sig is actually from one of the pics- I changed his apple in the lcd from white to blue.
|
If this post is in the Lounge forum, it is likely to be my own opinion, and not representative of the position of MacNN.com.
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: KrustyVille
Status:
Offline
|
|
Originally posted by vmarks:
I did do the paint removal on Solidage's tiBook. I used a product meant to strip the paint from an aircraft. The active chemical was toluene and methylene chloride.
Savogran SuperStrip was the product. Nasty stuff.
I have pictures, but they aren't online, since solidage's were. My sig is actually from one of the pics- I changed his apple in the lcd from white to blue.
Unfortunately Solidage's pics are offline. Would you post a few? Looks like a wicked job...
I like the blue logo. A treatment like that would certainly breathe some life into my old road warrior!
|
this lounge is a poor substitute to the bbq.
|
|
|
|
|
|
|
|
Mac Elite
Join Date: May 2001
Location: Connecticut
Status:
Offline
|
|
sorry about the pics guys, but you gotta cut your loses with the iDisk sometime s ;-)
Vmarks did an amazing job of stripping it. When i got it back, i was breathless at my beautiful baby. I have since sold it though as i needed a faster machine and it was 2 years old when I got it NEW.
The paint stripping does make it look brand new again, from those nasty paint chippings, it also almost COMPLETLY hid a gouge that my Ti took when it was eaten by a recliner...mmm tasty titanium.
Go luck with the process. As I speak Vmarks is now uploading the pictures as I just sent him all the ones I had. Again, good luck.
|
|
|
|
|
|
|
|
|
Moderator Emeritus
Join Date: Apr 2001
Location: Up In The Air
Status:
Offline
|
|
|
If this post is in the Lounge forum, it is likely to be my own opinion, and not representative of the position of MacNN.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|