9.2.1 In EnablerKit being attached
< Summary >
Software name: 9.2.1 EnablerKit
Version: 2.1j
Handling: Free wear
Reprinting method: When you can do, communication.
Writer: ITaro <
[email protected] >
Hardware requirement: MaccOs 9.1 moving, it does not correspond to 9.2.1 environment
Enviroment for software development: PowerBook G4 (MaccOs 9.2.1j)
PowerMacintosh 7300 (MaccOs 9.1j/9.2.1j)
MacsBug 6.6.3
UltraResEdit 2.1.3
ResCompare 2.5.3
Compressed method: DropStuff 6.0J
Pollution abatement: VirusBarrier 1.6.1j
Use: You can use MaccOs 9.2.1 way even with the old Mac
Constitution > of < folder
* Concerning the 9.2.1enablerKit (this file)
* Challenge method (until starting)
* Tools (necessary application and the like)
* Mac OS 9.2.1 Updater patch (patch for rise data file)
* Mac OS 9.2.1 Updater Direct patch (superscription patch for rise data file)
* System Patch (patch for System)
* MaC$oSMonolith (application for type ID disguise)
< Is made the opportunity > which
* Seeing it is to be thrown away being the __ it is not.
< Function >
* Type check of installer of MaccOs 9.2.1 nullfication
* Old the resource of the System which is necessary for starting in the type compensation
< Notice >
* This using the Kit, by any chance problem occurring, altogether, you do not take responsibility.
By all means utilization on self responsibility.
* As for the system and the important data the person who takes backup once is good, probably will be.
The one which it tries to be able to reset the system with anytime is safe.
< In addition >
* We wait operation and for report and problem report et cetera.
Especially, because completely there is no operation report with non- PC$$IPowerMac system and PowerBook system,
It operated, problem occurred, when and so on it is, we ask report by all means.
* After applying the patch, because as for hardware requirement of the system with respect to theory it is the same expectation as 9.1,
If 10001 report it can receive problem and environment even with when it does not move, also the probability which becomes somehow is high, is.
Is not the ____ which can solve problem securely, is. Pardon.
* And, as for driver such as peripheral device and upgrade card et cetera and software of third party make
Because there is no mono labor assistant, in regard to the problem solving you think cannot stand to part.
* Report, opinion et cetera the mail or it is good even with the bulletin board.
< Application >
* Please refer to " challenge method ".
< Modification past record >
* 2.1 (this version)
* Concerning the error when updating various
* 2.0
* The MacsBug was utilized, method of a time exceeding like type check evasion when starting is abolished,
Adding the resource which is not enough in the one for old type starting to the System, in the method of operating modification.
* 1.1
* It meaning that surroundings of the MacsBug are excessively troublesome, you prepare the Helper applet.
* It adds the file for the type other than 7300.
* 1.0
* First release
Somehow being to be able to verify that it moves, it releases.
< Operation verification >
* PowerMac 7300 (PPC604e/225mHz)
* Built-in both updating and starting to the HDD of the SCSI or the HDD of the ATA/66 of PCI card connection there is no problem.
Built-in Ethernet and video circuit, sound input/output, genuine CD and PCI card et cetera of ATA/66,
Without all problems in operation.
< Operation report >
* Type name (CPU classification / frequency [ - > clock rise ] / L2-cache capacity)
Addition peripheral device, in addition remark
* EnablerKit 2.0J
* UMAX S900 (HG4-400LC/400CMcHz/1MB)
PCI ATA/66 & HDD, built-in Ethernet, sound output and genuine CD, built-in CD-R/RW and PCI ULTRA SCSI
Card and ATI XCLAIM VR 128, ACARD AEC-6260CM and PCI USB Card
* PowerMac 9650 (Sonnet G3/500MHz)
Sonnet PCI ATA/66 & HDD, Voodoo5 and Matsushita CDR, ProcTv2 and SoundBlaster
* PowerMac 7600 (Melco G4/350- > 420MHz)
* PowerMac 9500 (MAXpowr G3/500MHz/1MB)
PCI ATA & HDD, ATI RAGE ORION, even with Classic environment on OSX starting
* PowerMac 8500 (MAXpowr G3/500MHz/1MB)
PCI ATA & HDD, even with Classic environment on OSX starting
* PowerMac 7500 (PowerLogix 400MHz/1MB)
* PowerMac 7300 (G3/400MHz)
PCI ATA/66 & HDD
* PowerMac 8600 (Sonnet G3/400MHz/1MB)
PCI ATA & HDD, TwinTurbo 8m, with part application in & Drag Drop difficulty to be
* UMAX S900 (MAXpowr 220- > 341mHz)
ATA/100 (STF)
* PowerMac 8600 (PowerLogix G4/350- > 400MHz)
AEC-8680 and Century FireWire
* PowerMac 7300 (MADMAX G3/400/1MB)
PCI ATA/66
* UMAX Pulsar 2330VR (MAXpowr G3/300MHz)
Voodoo 3000/PCI, RexcPci32p (SCSI)
* PowerMac 7300 (MAXpowr G3/500MHz)
ATI RAGE128, PCI USB, PCI ATA/66 & HDD
* PowerMac 8500 (MAXpowr G3/300MHz)
In FletscAdsl connected tool difficulty to be
* PowerMac 9600 (604e/300MHz)
PCI ATA & HDD, PCI USB
* PowerMac 8500 (HG3-PM500SLC/500CMcHz)
PCI ATA/66 & HDD, even with Classic environment on OSX starting
* Performa 6420 (Sonnet G3/400MHz)
* EnablerKit 1.1j
* PowerMac 8500 (MACh Carrier G3/300MHz/512KB)
Report thank you.
Ahead < writer communicating >
* ITaro
* EMail
*
[email protected]
*
[email protected]
* CubiC$area
* Http: //www.aaw.ne.jp/taro/