MacNN Forums (
-   Tech News (
-   -   Teardown of gold iPhone 5s reveals few internal changes (

NewsPoster Sep 19, 2013 10:37 PM
Teardown of gold iPhone 5s reveals few internal changes
The team at <a href="" rel='nofollow'>iFixit</a> have gotten a hold of a gold iPhone 5s and published a <a href="" rel='nofollow'>short teardown</a> guide for the unit, revealing very few changes (as expected) from the iPhone 5 apart from a slightly bigger battery, a new processor and a new camera assembly, now revealed to be supplied by Sony. Apple has kept the camera at 8MP but increased the size of the sensor and pixels to be larger, allowing more color and light in.<br />
<br />
Small changes include a different method of gluing the battery into place, a different Bluetooth/802.11 combo chip, the streamlining of components so that interconnect cabling is no longer required, and on the gold model the use of small gold screws. The battery is now glued in using two adhesive strips rather than the iPhone 5's small amount of crazed glue, making removal much more difficult but not impossible.<br />
<br />
The iFixit team also disassembled the Touch ID fingerprint sensor and noted that it uses small CMOS sensor to digitally image the fingers. The choice may result in future repairs, as CMOS sensors tend to wear out over time (longer than the normal expected three-year lifespan of an iPhone, but eventually). The camera module, made by Sony, hasn't been seen previously and is somewhat different from the 8MP sensor used in the iPhone 5. Apple's software also lets the camera be used to shoot in "square" format alongside the usual offerings in iOS 7, and the video is now capable of 120fps capture, allowing for flawless slow motion if desired.<br />
<br />
In addition, iOS 7 brings support for "Hotspot 2.0" features, which include automatic supplying of login credentials to make frequent public or work Wi-Fi network joining seamless. There are also a number of improvements incorporated in the Accessibility section of iOS 7, including support for Made for iPhone hearing aids (for the iPhone 5 and later).<br />
<br />
An earlier <a href="" rel='nofollow'> teardown</a> of both the 5s and 5c noted that the company has added an extra layer of coating to switches, which may aid in preventing internal failures. The iExperts who did the Australian teardown also noted that the batteries are slightly different (the iPhone 5c uses a 5.73Whr battery while the iPhone 5s has a 5.92Whr rating) and that both are stamped "Apple Japan," suggesting a change in suppliers.<br />
<br />
The screws used in the iPhone 5s are again the same pentalobe screws used in the iPhone 5, requiring a special tool to remove. Replacement screws in the gold color are not yet available to repair techs.<br />
<br />
One note of caution sounded by the iFixit techs to users attempting a home repair is that in addition to several specialized tools, there is a flexible cable connecting the display assembly to the rear chassis, which could be damaged when using a suction cup to separate the two. The cable connects the Touch ID sensor to the main assembly, but can be gently freed with the help of a spudger.<br />
<br />
<br />
iphonerulez Sep 19, 2013 10:59 PM
Well, there's no innovation in there. Close it back up.
Spheric Harlot Sep 20, 2013 01:23 AM
Nope, none at all.

Patient's dead; sew 'er up and throw her in the sack.
Charles Martin Sep 20, 2013 03:25 AM
Why would anyone want one of these when it's clearly last year's model with a new gold dress on? ;)
Spheric Harlot Sep 20, 2013 06:01 AM
It's actually last year's dress, but with a new model to wear it.

Laminar Sep 20, 2013 06:03 AM
Can someone explain this to me?

Quote, Originally Posted by NewsPoster (Post 4248732)
Apple has kept the camera at 8MP but increased the size of the sensor and pixels to be larger
I thought a pixel was a pixel; I didn't realize you could have different sized pixels.
Spheric Harlot Sep 20, 2013 06:10 AM
A pixel is a point in an image, not a unit of measurement.

There's the absolute number of pixels in an image or sensor, and there's the pixel density, in pixels per inch or cm.

Same number of pixels, but larger sensor, means lower pixel density and larger pixels, means more light per pixel, means shorter exposure times (= less motion blur) and less noise in the final image.
Laminar Sep 20, 2013 09:16 AM
Ah, that makes sense now. Thanks. So you want a low pixel density in your camera sensor and a high pixel density in your display?
Spheric Harlot Sep 20, 2013 10:27 AM
That's the gist of it. :)
All times are GMT -4. The time now is 12:26 PM.

Copyright © 2005-2007 MacNN. All rights reserved.
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

Content Relevant URLs by vBSEO 3.3.2