|
|
9650 in G4 not working with tape mod
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2004
Location: Holland
Status:
Offline
|
|
Hi,
I wanted to swap the 9800 pro out of a DA G4 with a 9650 out of a G5 dual 2.7. The 9800 works great in the G5 but I can't get the 9650 working. I taped the 3 and 11 pin on the card. The g4 is booting but no picture. Any suggestions
|
|
|
|
|
|
|
|
|
Senior User
Join Date: Sep 2005
Location: Anson, TX
Status:
Offline
|
|
What G4 model is it? As I understand it, only the 4x AGP G4s could run a card with the tape mod
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2004
Location: Holland
Status:
Offline
|
|
Originally Posted by hookem2oo7
What G4 model is it? As I understand it, only the 4x AGP G4s could run a card with the tape mod
It's a DA (digital audio) originally a 466mhz. Now running on 1,47ghz with Fastmac upgrade
|
|
|
|
|
|
|
|
|
Senior User
Join Date: Sep 2005
Location: Anson, TX
Status:
Offline
|
|
Hmm, thats a 4x AGP mac. I've read that certain 9600s and 9650s just didn't have the proper circuitry for the tape mod to work, but that was in various posts on other forums...never found a definitive answer, so i just bought a 9800 pro for my DA...
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2004
Location: Holland
Status:
Offline
|
|
That's what I did to. But now I want to use the 9800 in my new (used) G5. Well if it's not going to work I'll have to flash another 9800 or just put in the old 16mb radeon. I'm not going to use the G4 for heavy stuff anymore caus I have my G5
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Nov 2004
Status:
Offline
|
|
are you 100% sure you taped the right pins?
|
I love lamp! I love lamp...
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2004
Location: Holland
Status:
Offline
|
|
I think so. Did it three times. But I'll give it one more try
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Nov 2004
Status:
Offline
|
|
|
I love lamp! I love lamp...
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2004
Location: Holland
Status:
Offline
|
|
Followed the instructions carefully but no luck. Zapped the pram. The mac is booting up. The screen stays black. I think I have a card which will not work.
|
|
|
|
|
|
|
|
|
Baninated
Join Date: May 2005
Location: England
Status:
Offline
|
|
i think i remember that the mother board doesnt have enough power. what monitor connector are you using? i remember seeing that the apple connectors which power the monitor aswell drain extra power, so try using a different monitor
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Jan 2004
Location: Holland
Status:
Offline
|
|
I'm using a dvi-vga adapter. Hooked it on a sony 19 inch, dell 17 inc, philips 15 inch. All CRT. Perhaps only LCD will work?
|
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Nov 2004
Status:
Offline
|
|
well if it was a tape issue, I think you wouldn't get a boot up. IIRC, it causes a short that prevents the system from starting.
|
I love lamp! I love lamp...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|