|
|
OS X on a PowerTower Pro...
|
|
|
|
Addicted to MacNN
Join Date: Jan 2000
Location: Stoneham, MA, USA
Status:
Offline
|
|
You can do that right? With the same programs that let you put X on the 7500/8500/9500's? And what about these legacy MP setups? Two (or more) 604e's. When you install X, does it use both processors as nicely as it uses both processors in my dual 533?
Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm?
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Oct 2001
Status:
Offline
|
|
Yes you can put X on a PTP using Xpostfacto. Currently only one 604 will work under X but the developer has mentioned that it is possible to add multiprocessor support for the 604 chips.
Britney
|
|
|
|
|
|
|
|
|
<joey>
|
|
Erggg. i need help installing OSX on my PowerCenter Pro 180, Post Facto works halfway and then freezes at the very first spinning rainbow before the intall after reboot from post facto...
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Jan 2000
Location: Stoneham, MA, USA
Status:
Offline
|
|
Then perhaps you should post your problem in a topic on this forums, instead of simply telling use about it.
|
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Feb 2000
Location: Fort Myers, FL, USA
Status:
Offline
|
|
A good place for some help is xlr8yourmac's bbs... <a href="http://bbs.xlr8yourmac.com" target="_blank">http://bbs.xlr8yourmac.com</a> (although they seem to be down right this very second). There is a section devoted to running OS X on pre-beige G3 Macs. Hope this helps.
Chris
|
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Jan 2000
Location: Stoneham, MA, USA
Status:
Offline
|
|
What about sonnet's software, has anyone tried that? I couldn't find enough info, but you think that will run both my 604e's under X?
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Oct 2001
Status:
Offline
|
|
</font><blockquote><font size="1" face="Geneva, Verdana, Arial, sans-serif">quote:</font><hr /><font size="1" face="Geneva, Verdana, Arial, sans-serif">Originally posted by <joey>:
<strong>Erggg. i need help installing OSX on my PowerCenter Pro 180, Post Facto works halfway and then freezes at the very first spinning rainbow before the intall after reboot from post facto...</strong></font><hr /></blockquote><font size="1" face="Geneva, Verdana, Arial, sans-serif">You can try to boot in to Verbose mode by selecting the Advanced menu in XpostFacto to see where X is hanging. You also should check your SCSI termination on all SCSI devices. My CD-ROM was incorrectly terminated from the factory. In 9 it was rock solid but it would not boot X until I corrected the termination. Also, your CD-ROM may not be supported for booting OS X.
Britney
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|