|
|
Power Mac 8550
|
|
|
|
Junior Member
Join Date: Aug 2000
Location: USA
Status:
Offline
|
|
I am attempting to install a Sonnet Crescendo G4 Upgrade card on our school's old Power Mac 8550 Workgroup server.
While, I am not a complete idiot and have installed RAM in Macs before, I am a bit baffled about removing the logic board to remove the Level 2 cache card. First of all, do I really have to remove this card? Second of all, where can I find instructions on removing the logic board on the 8550? I would feel much better if I could see a couple of photographs. Where could I find some instructions on removing the logic board from the 8550?
The reason why I am doing this (or trying to do this) in the first place is that our school has switched to (ugh) all Dell Computers and our tech guys won't touch any of the old Macs, even if it means letting the Crescendo G4 Upgrade card and money they spent on it go to waste.
All help you might give me, or to "point me in the right direction" would be greatly appreciated.
Joe Sullivan
|
It's not getting what you want, it's wanting what you've got.
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Mar 2000
Location: Seattle, WA
Status:
Offline
|
|
it should be just like the powermac 8500, right? If I remember correctly there is a page at http://macgurus.com that details what you need to do to take the thing apart. Hope this helps!
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Mar 2001
Location: Texas!
Status:
Offline
|
|
It's pretty simple to do. Here's a link to the official Apple service pdf.
LINK-A-ROONIE
All the rest of the manuals are there, too! All of them!
|
-- | T () /\/\ /.\ T () --
|
|
|
|
|
|
|
|
Registered User
Join Date: Apr 2000
Status:
Offline
|
|
Pretty much identical to the 8500 - completely identical, hardware wise.
The '50' designation means 'server'.
Yes, you must remove the L2, the upgrade probably has its own.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: near Boulder, Colorado
Status:
Offline
|
|
"It's pretty simple to do." that's a riot Tomato...
I've had an 8500 since '97 and the word "simple" is not in its maintenance dictionary...
Really, tho, it's not bad, just time consuming.
Remove all PCI cards, processor card and unplug AV module(don't think the 8550 had that)
Disconnect all the cables, internal and external from the MoBo.
Remove the Phillips screw in the center of the MoBo.
Slide the MoBo forward 1/4-1/2 inch and lift a tab, lean and tilt it out.
The L2 card will likely be very hard to get out. be persistent, rock it gently.
If you are inserting RAM in slots that have been open a few years, plug each module n several times to clean the contacts.
This would be a real good time to blow everything out, esecially the power suply, with comressed air.
If the Sonnet carrier has adjustments for bus speed, the official range is 40-50 MHz (my 8500 is at 56.8 MHz)
This will probably take an hour or so the first time, should be able to hit 30-40 min with practice.
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Aug 2000
Location: USA
Status:
Offline
|
|
Thanks to everyone who replied to my question. I think I feel comfortable attempting to install this card now. I truly appreciate all the advice and encouragement you folks have given me.
Now my next problem is getting the computer back, since our school's tech guy has assigned it to another teacher who wants it to run "Math Blasters" and other 10 year old software. I tried explaining that with the new processor card, it would be a G4 ... and a very powerful computer, and that most of this math software will run on an LCII, but I think my pleas are falling on deaf ears. Pray for me.
|
It's not getting what you want, it's wanting what you've got.
|
|
|
|
|
|
|
|
Senior User
Join Date: Jan 2001
Location: Southern CA
Status:
Offline
|
|
A bit off topic, but does anyone know where I can get the lowest prices on DIMMs for the 8500. The lowest I've seen so far is datamem.com (128MB for $59, but since they should be installed in pairs that would be about $118).
|
Who'sDaMac?
|
|
|
|
|
|
|
|
Junior Member
Join Date: Jan 2001
Location: Pottstown, PA. USA
Status:
Offline
|
|
Originally posted by I'mDaMac:
<STRONG>A bit off topic, but does anyone know where I can get the lowest prices on DIMMs for the 8500. The lowest I've seen so far is datamem.com (128MB for $59, but since they should be installed in pairs that would be about $118).</STRONG>
They don't have to be in pairs neccessarily... http://www.macgurus.com/shoppingcart...mbppc8500.html
|
-- "Does Microsoft mean 'small & limp?'
|
|
|
|
|
|
|
|
Junior Member
Join Date: Aug 2000
Location: USA
Status:
Offline
|
|
About adding RAM to 8500:
One of the things Sonnet said to to do when I install the Processor upgrade is to "de-interleave" the RAM. Their tech support guy said G3 and G4 processors "don't like" interleaved RAM. Don't know if this helps, but thought I'd pass it along. Thanks again to everyone who helped me out.
|
It's not getting what you want, it's wanting what you've got.
|
|
|
|
|
|
|
|
Junior Member
Join Date: Aug 2000
Location: USA
Status:
Offline
|
|
One more thing: I was thinking as long as I'm ripping the computer apart to install a G4 processor, would it really be worth it to install a larger hard drive and maybe add a PCI card for Firewire or USB? I figured that that might cost another 300-400 bucks. Would it be worth it? Our school will probably never buy another Mac in my lifetime and an upgraded computer would be better than the stinkin' Dells their buying.
|
It's not getting what you want, it's wanting what you've got.
|
|
|
|
|
|
|
|
Senior User
Join Date: Jan 2001
Location: Southern CA
Status:
Offline
|
|
a b
Originally posted by joeswell:
<STRONG>One more thing: I was thinking as long as I'm ripping the computer apart to install a G4 processor, would it really be worth it to install a larger hard drive and maybe add a PCI card for Firewire or USB? I figured that that might cost another 300-400 bucks. Would it be worth it? Our school will probably never buy another Mac in my lifetime and an upgraded computer would be better than the stinkin' Dells their buying.</STRONG>
I have an 8500 (Newer G3/400) that I upgraded with a Sonnet Tango (combo USB/FireWire) card last year. It breathed new life into my trusty ole Mac. I was/am able to buy any USB mouse on the market (Microsoft Wheelmouse Optical, BTW), not to mention any other USB peripheral on the market. I also put together an external FireWire HD that I'll be able to use with the new G4 I plan on buying later this year. IMHO, it was a good investment for a great machine.
|
Who'sDaMac?
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Mar 2001
Location: Texas!
Status:
Offline
|
|
Originally posted by I'mDaMac:
<STRONG>A bit off topic, but does anyone know where I can get the lowest prices on DIMMs for the 8500. The lowest I've seen so far is datamem.com (128MB for $59, but since they should be installed in pairs that would be about $118).</STRONG>
Other World Computing
$45.95 for 128MB!
|
-- | T () /\/\ /.\ T () --
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: near Boulder, Colorado
Status:
Offline
|
|
I didn't hear about "de-interleaving" until after I had a G3-400 OEM ZIF and XLR8 carrier card running at 454 with 240MB still interleaved.
It had its first night powered down in a year last week, cause I forgot to feed SUM some SETI units.
I also think that it's worth the extra bucks for EDO RAM vs. FPM.
At least I did then...
z
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|