|
|
large house project: 3 airport base stations?
|
|
|
|
Mac Enthusiast
Join Date: Sep 2003
Status:
Offline
|
|
Hey,
I currently have a cable modem that runs to a netgear router, and of the 4 ports on it, 1 goes to linksys router in the other end of the house, and the other 3 are used by bedrooms in this end of the house. Both routers serve the entire house with some wireless signal.
Its working pretty well. But I have had a few issues. First of all, the gigabit worthy router I started with is crap, and past its return date. I even bought another one and it had the same problems. I am now running a G Netgear (older) router as the first one, and still using a G (linksys) router as the second one.
I'd like to switch to a 3 router setup (and possibly a 4th in the future). I am curious how well 3 or 4 airport base stations would work together. I have no experience with apple's software config, but I was hoping it would do the following:
- Make the configuration easy
- Allow all 4 routers to think they are on the same router, so itunes and printer shares work
- Allow for easy config changes to all 4 (and a super bonus would be added if it recognized what I was doing and allowed me to just change the config in one place)
- Make the port forwarding easier, as ichatting can be a pain.
Components using this setup
- 7 Macintosh OSX Tiger computers
- Entertainment switch box (Which connects x360,wii,ps2)
- 1 Slingbox
- 1 Pc laptop
I have heard that I can name all the SSID's the same and make sure each one is on a separate channel and then the computers would just network hop as signal got strong/weak. Is that true? Or should i give them sequential names and just choose based on where I am in the house? (this is not the biggest problem as only 1 or 2 of the computers are mobile)
Thanks for any thoughts
|
| MBA Student | MacAddict | CarAddict | PhotoNut | Dork | PhishHead |
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Sep 2003
Status:
Offline
|
|
fyi: my current setup works fine, its just not as fast as gigabit ethernet would be, or N signal from apple.
|
| MBA Student | MacAddict | CarAddict | PhotoNut | Dork | PhishHead |
|
|
|
|
|
|
|
|
Posting Junkie
Join Date: Oct 2005
Location: Houston, TX
Status:
Offline
|
|
Originally Posted by Bruck
I have heard that I can name all the SSID's the same and make sure each one is on a separate channel and then the computers would just network hop as signal got strong/weak. Is that true? Or should i give them sequential names and just choose based on where I am in the house? (this is not the biggest problem as only 1 or 2 of the computers are mobile)
You want all the SSIDs to be the same, so you can walk around the house and not lose the connection.
As I understand the Airport Base Stations, your plan should give you what you want. Another option would be to buy one Linksys WRT330N and install a high-gain omni antenna to cover the entire property. Although with the improved range of n (about twice the range of g), you may not even need the high-gain antenna.
|
|
|
|
|
|
|
|
|
Administrator
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
To get the roaming coverage you want, you need all the SSIDs to be the same and each base station's manually selected channel to be different. It's usually a good idea to space the channels at least 3 or 4 channels apart.
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Sep 2003
Status:
Offline
|
|
what about the modes required to make these do what I want? Will I need to use 1 of the 3 wired ports on each of the satellite AEBSs for the connection OR can I use the WAN port?
Trying to figure out how many wired ports each will give me
|
| MBA Student | MacAddict | CarAddict | PhotoNut | Dork | PhishHead |
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Dec 2003
Location: Manhattan Beach, CA
Status:
Offline
|
|
Originally Posted by ghporter
To get the roaming coverage you want, you need all the SSIDs to be the same and each base station's manually selected channel to be different. It's usually a good idea to space the channels at least 3 or 4 channels apart.
GHPorter: Is this true even if the second AEBS (fast ethernet) is only extending the range of the network created by the first? Different channels for each Base Station?
|
MBP 15" 2.4 Ghz 4Gb
MBA 13" 1.6 Ghz 2Gb
|
|
|
|
|
|
|
|
Addicted to MacNN
Join Date: Mar 2006
Status:
Offline
|
|
|
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Dec 2003
Location: Manhattan Beach, CA
Status:
Offline
|
|
Ok. Glad to try this, but how do I change the channel for the second base station? When I open Airport Utility and click on manual setup, it shows that the channel is set automatically. I have it set to Extend an existing network. and to Bridge mode (per recommendations of the Apple techs). Is there any way to manually change the channel?
|
MBP 15" 2.4 Ghz 4Gb
MBA 13" 1.6 Ghz 2Gb
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Sep 2003
Status:
Offline
|
|
the channel off automatic.
For the record, I ended up going this route, I bought 3 AEBS and set up the entire network. I AM SO HAPPY TO BE USING APPLE ROUTERS. they work beautifully!!!
|
| MBA Student | MacAddict | CarAddict | PhotoNut | Dork | PhishHead |
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Dec 2003
Location: Manhattan Beach, CA
Status:
Offline
|
|
Congratualation Bruck. Glad it's working well for you. I love the simplicity of Apple's AEBS.
Regarding changing the channel manually: I have my second AEBS set to extend the network. With this setting, there is no option to change the channel.
I tried switching the setting on the second AEBS to create a new network. That then revealed the channel option; I selected a different channel, and then went back and changed the first setting back to Extend the Network, and updated. The second AEBS reverted back to the channel of the first AEBS.
SO: the two options are Extend the Network and keep the same channel for both AEBS, or create a WDS. But I previously could not get a WDS to work between two AEBS stations. Apple tech support recommended the Extend the Network option and that has worked. So did you successfully create a WDS with more than one AEBS?
Thanks for your help (or any others' who have some advice). And congrats again on getting the network working in your home.
|
MBP 15" 2.4 Ghz 4Gb
MBA 13" 1.6 Ghz 2Gb
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|