|
|
MBP Hard Drive Replacement - Easy?
|
|
|
|
Grizzled Veteran
Join Date: Sep 2001
Status:
Offline
|
|
Anyone tried taking their HD out of their MBP yet? On a 1-10 scale, how hard is it? I am thinking about upgrading my capacity but am not sure if the juice is worth the squeeze. Any great how-to documents?
Thanks!
|
MacBook Pro 15" -- 2.2Ghz, 4GB, 200GB 7200rpm
iPod Nano 2G -- 8GB
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Oct 2001
Location: Washington DC
Status:
Offline
|
|
You can find the actual Apple service Source manuals online... Just google "Apple Service Source" - they are PDFs that show you how to take a given Mac apart down to the last torx screw....
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Aug 2000
Status:
Offline
|
|
Yes, it is much easier than the AlBooks were--maybe a little harder (more screws) than the old Titaniums.
|
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Dec 2005
Location: Orlando, FL
Status:
Offline
|
|
|
|
|
|
|
|
|
|
|
Grizzled Veteran
Join Date: Sep 2001
Status:
Offline
|
|
Sorry -- I've seen the diagrams and assembly manuals, so I should have been more explicit about my underlying question. Sometimes, when you disassemble a laptop, it's really harder than it looks. The angle to get certain screws is tough; pieces tend not to snap back together easily; parts don't go back as flush as they were before; etc. I was more looking for anecdotal experiences like this, if anyone has had any. I am thinking about slapping a 120GB Seagate into my stock 1.83 but want to make sure it's not too too bad.
Thanks!
|
MacBook Pro 15" -- 2.2Ghz, 4GB, 200GB 7200rpm
iPod Nano 2G -- 8GB
|
|
|
|
|
|
|
|
Dedicated MacNNer
Join Date: Sep 2000
Location: Wilsonville, OR, USA
Status:
Offline
|
|
Why do you say it's much easier than the AlBooks? The diagrams I saw at ifixit look almost identical to the 17" PB. The only real difference I saw from the 15" PB was that there wasn't this stupid hidden catch behind the DVD drive opening that you needed to blindly fish for.
The Titaniums were much easier and the HD in those were a user replaceable part. I don't think the HD in the MBP is considered user replaceable.
Originally Posted by mrmister
Yes, it is much easier than the AlBooks were--maybe a little harder (more screws) than the old Titaniums.
|
MacBook Pro 17" 2.4 Ghz, 4GB ram, 200GB 7200rpm HD
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Dec 2005
Location: Orlando, FL
Status:
Offline
|
|
How about shelling a few bucks and letting an authorised person take care of it.
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Nov 2003
Status:
Offline
|
|
I've successfully taken apart some difficult Apple machines. I print out the instructions, and when I take out each screw, I attach it by scotch tape on the picture on the instructions where it goes. Same with other parts (like optical drives or whatever), making sure they're oriented properly on the picture. Then it's pretty straightforward putting it together again. Some Apple laptops have screws with slightly different lengths that go in different places, and it's not obvious where to put them unless you've carefully used some system like mine when you disassemble it. Of course, everything should go back together smoothly -- if not, you've made some mistake. You also have to be careful to route all the wires correctly, as otherwise the machine won't go back together properly. Also, when you take it apart, follow the manual exactly -- don't try to skip a step that doesn't seem necessary. This is all obvious, but if you get impatient, you'll kill your notebook. Still, if you're very careful, it's not that hard.
|
|
|
|
|
|
|
|
|
Grizzled Veteran
Join Date: Sep 2001
Status:
Offline
|
|
Originally Posted by hemant
How about shelling a few bucks and letting an authorised person take care of it.
This is an unhelpful response -- and one antithetical to the entire purpose behind these forums. The forums are intended as place where users of all levels of skills can come to diagnose troubles with their machines, as well as to solicit feedback regarding possible upgrades and challenges. If you don't know anything about the inner workings of the MacBook Pro and the difficulties associated with upgrading its components, then you really shouldn't post in a thread such as this. If you have specific experience regarding the difficulties associated with MBP component installations, that would be helpful, but a generic jab at my not wanting to pay is not welcome.
|
MacBook Pro 15" -- 2.2Ghz, 4GB, 200GB 7200rpm
iPod Nano 2G -- 8GB
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Aug 2000
Status:
Offline
|
|
"Why do you say it's much easier than the AlBooks? The diagrams I saw at ifixit look almost identical to the 17" PB."
It isn't all that similar in the end--the screws are more standardized and since there are no hidden hooks it's pretty simple. I watched someone pop one open at Tekserve a few days ago and it's much easier than the AlBooks--all the technicians agreed.
|
|
|
|
|
|
|
|
|
Junior Member
Join Date: Jan 2004
Status:
Offline
|
|
My god I hated those hooks.
|
|
|
|
|
|
|
|
|
Forum Regular
Join Date: Dec 2005
Location: Orlando, FL
Status:
Offline
|
|
Originally Posted by John123
This is an unhelpful response -- and one antithetical to the entire purpose behind these forums. The forums are intended as place where users of all levels of skills can come to diagnose troubles with their machines, as well as to solicit feedback regarding possible upgrades and challenges. If you don't know anything about the inner workings of the MacBook Pro and the difficulties associated with upgrading its components, then you really shouldn't post in a thread such as this. If you have specific experience regarding the difficulties associated with MBP component installations, that would be helpful, but a generic jab at my not wanting to pay is not welcome.
No hard feelings, I was suggesting that because you were worried about the difficulty of the project and for like $30 Compusa will do it. Remember we are talking about voiding your warranty here so why not spend $30 and not mess around with a machine that's worth $3K. Anyways Good luck.
|
|
|
|
|
|
|
|
|
Grizzled Veteran
Join Date: Sep 2001
Status:
Offline
|
|
Originally Posted by hemant
No hard feelings, I was suggesting that because you were worried about the difficulty of the project and for like $30 Compusa will do it. Remember we are talking about voiding your warranty here so why not spend $30 and not mess around with a machine that's worth $3K. Anyways Good luck.
It doesn't void the warranty. If you damage something in the course of installing a part, sure, that damage isn't covered by warranty...but the computer's warranty isn't voided just because you replace a part.
|
MacBook Pro 15" -- 2.2Ghz, 4GB, 200GB 7200rpm
iPod Nano 2G -- 8GB
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|