|
|
powermac g4 and airport.....
|
|
|
|
Mac Enthusiast
Join Date: Dec 1999
Location: UK
Status:
Offline
|
|
I have one of the early powermac g4's that I use now and again when I need to boot up in OS9
But I'm not sure if my model accepts an airport card
where do I need to check to see if it accepts one or not?
rich
|
PowerMac G5 Dual 1.8GZ, 2GB RAM, 150 & 300 GB Internal Hard Drives, AGP Geoforce 5200 64MB Graphics Card, Superdrive.
|
|
|
|
|
|
|
|
Mac Enthusiast
Join Date: Nov 2000
Location: Palo Alto, CA USA
Status:
Offline
|
|
|
|
|
|
|
|
|
|
|
Administrator
Join Date: Jun 2000
Location: California
Status:
Offline
|
|
All AGP PowerMacs accept an AirPort card. In your case, it is an original AirPort 802.11b card. It slides into a carrier forward/under the PCI bay, in the front of the motherboard.
You may do better with a PCI card. That would give you 802.11g at the very least, preferably 802.11n. 'b is pretty slow today.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Mar 2006
Location: Here
Status:
Offline
|
|
Originally Posted by reader50
All AGP PowerMacs accept an AirPort card. In your case, it is an original AirPort 802.11b card. It slides into a carrier forward/under the PCI bay, in the front of the motherboard.
You may do better with a PCI card. That would give you 802.11g at the very least, preferably 802.11n. 'b is pretty slow today.
This is not to mention that if you use 802.11b, you slow down every machine on your network down to 11Mbps shared among them. That's less than ideal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|