|
|
Update 10.4.2 killed my linksys PCI card
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: No frelling idea
Status:
Offline
|
|
I was using a linksys PCI card in my PM QS so I could use 802.11g and WPA. It has worked flawlessly from Jaguar to Panther and to Tiger until this last update. I was hoping that the wireless update Apple released a day or so after would have resolved this, nope.
Anyone know what I should do? Possible suggestions, tries?
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Aug 2004
Status:
Offline
|
|
Same thing here... tried repair permissions, cache cleaning, etc, but not luck. I'm using a PMG5 2.0.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: No frelling idea
Status:
Offline
|
|
I was starting to think it was just me.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Jul 2003
Location: Body in London, mind elsewhere
Status:
Offline
|
|
not much help with your current card, but my Belkin F5D7000 wireless PCI is working fine in Tiger and WPA on my QS.
have you tried deleting the settings for you airport connection, then re connecting?
|
|
|
|
|
|
|
|
|
Administrator
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
This is just a guess (I have our iBook networked through an internal AirPort card, and we haven't plopped down the cash for Tiger yet) but this sounds like a driver issue. Ok, I know that driver issues are supposed to hit Windows users, not Mac users, but changing the OS can cause this sort of thing.
This sort of OS-change-related problem can come from two related issues. When Tiger installed the networking modules it did not correctly or successfully identify your wireless card, so it either installed the wrong module or no module to run it. Basically you may need to either reinstall the MacOS driver for your PCI card, or find new software for your card that explicitly supports Tiger. From what I've read (and experience with other OSs), reinstalling the drivers that came with the card has a high probability of working. Give it a shot-if it doesn't fix the problem it certainly can't hurt anything, and if it doesn't work, we can all start working on "plan B."
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: No frelling idea
Status:
Offline
|
|
Thanks for the replies. Tried the Pref. thing, not go. Looked for a driver at Linksys, they don't support Mac's.
I looked in the System Profiler>Network>Airport Card and for the "Airport Card Information:" I have the following:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 400.17 (3.90.34.0.p11)
And of course no wireless network available.
For one, it sees an Airport Extreme card, two there is a firmware version. Does anyone know if it's a linksys FW or Apple's last update?
One other thing. The only reason I even got a PCI card was for the G standard and WPA. I am fine getting a new card and selling this one to work or something. Does any one make and "support" a PCI card? If so, how have they been about support through OS upgrades.
Don't have too much more time to spend on this tonight nor this week, but if anyone has a suggestion I'll try it when and can and post back the results.
In the interum, is there a way I can use my float Airport Express to bridge this gap for me? You know, use the Ethernet port from the QS and AEE? Thanks.
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Jul 2003
Location: Body in London, mind elsewhere
Status:
Offline
|
|
well, as i said above my Belkin card still works without any problems and is a very cheap PCI card to buy,
have you tried re-installing the 10.4.2 combo update?
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: No frelling idea
Status:
Offline
|
|
Originally Posted by Nivag
well, as i said above my Belkin card still works without any problems and is a very cheap PCI card to buy,
have you tried re-installing the 10.4.2 combo update?
Nope, but I'll give it a shot. Thanks.
|
|
|
|
|
|
|
|
|
Administrator
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
The computer is seeing an AirPort card when you don't have one. THAT is why it is NOT seeing the Linksys card. Tiger probably supports Linksys' card, but since the machine thinks there's an AirPort card there, it can't see the Linksys card. Unfortunately I don't know how to tell Tiger to forget about the AirPort card that isn't there... I think that's the solution to your problem.
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: No frelling idea
Status:
Offline
|
|
OK, tried reinstalling the update. I think I'll just check out the Belkin card and eBay the other.
thanks all.
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: Aug 2004
Status:
Offline
|
|
|
|
|
|
|
|
|
|
|
Mac Elite
Join Date: Oct 1999
Location: No frelling idea
Status:
Offline
|
|
Admiral Ahkbar,
Thank you, that worked. Saved me some cash as I was just about to buy a replacement card.
|
|
|
|
|
|
|
|
|
Fresh-Faced Recruit
Join Date: May 2005
Status:
Offline
|
|
Same issues! I have a number of Macs with the same set-up, and 10.4.2 did the same thing. I had to go back down to 10.4.1 to get my machines back up with netork access.
A friend told me it was a Linksys firmware issue, and so I updated all the firmware on the Routers as well...afterwhich, i had the SAME PROBLEM!!
Waitng for 10.4.3!
-Asagai
|
|
|
|
|
|
|
|
|
Senior User
Join Date: Dec 1999
Location: Alexandria, VA USA
Status:
Offline
|
|
I came across this thread while trying to trouble shoot my Airport problem. I am running 10.3.9 on an upgraded Beige G3 (G4/500/768MB) with a Linksys PCI 802.11g card. After I updated to Airport 4.2 (via SW update), my PCI card is not picking up signals.
I have tried to use Pacifist, but must be doing something wrong. Could someone explain the process for updating? I have DL'd AirPort 4.1, and tried to reinstall from Pacifist, but no luck.
Any help would be appreciated.
TIA
|
|
|
|
|
|
|
|
|
Senior User
Join Date: Dec 1999
Location: Alexandria, VA USA
Status:
Offline
|
|
To clarify my question...
What do you need to do to remove/replace a kext file? Can I simply use Pacifist to to selectively install and over write the files?
The card did work before the Airport 4.2 update. Can I pull kext files from 10.4 and use them in 10.3.9?
I guess I'm trying to downgrade to the old version of my Airport SW.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forum Rules
|
|
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
|
|
|
|
|
|